MARATTO

article · Heliyon

Wideband and high gain elliptically-inspired 4 × 4 MIMO antenna for millimeter wave applications

20248 citationsOpen accessMinia University

Abstract

An elliptically-inspired microstrip antenna is utilized in this paper to operate in the V-band (52.9-70 GHz) of the millimeter frequency range for 5G applications. 2-port and 4-port multi-input-multi-output (MIMO) configurations are designed, fabricated, and tested to validate the desired radiation and impedance characteristics. The measured results mimic the simulated ones in terms of scattering parameters, and MIMO parameters. Although the 4-port footprint is considered miniaturized (26 × 26 mm<sup>2</sup>), it provides a reduced coupling between ports (≤20 dB) with an improved gain ranging from 8 to 10.1 dBi. Furthermore, the achieved MIMO parameters (ECC, DG, CCL, and MEG) are distinct with values of 0.006, ≥9.96 dB, ≤0.4 bits/s/Hz, and -3 dB, respectively. The introduced 4-port MIMO antenna is compared with the state-of-the-art antennas and this assures that the suggested model has built-in size, wider impedance bandwidth, and higher isolation with an improved diversity characteristic confirming the possibility of the presented MIMO antenna to be a challenging candidate for 5G wireless communications.

Research topics

  • Antenna Design and Analysis
  • Millimeter-Wave Propagation and Modeling
  • Advanced MIMO Systems Optimization

Sustainable Development Goals

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.1016/j.heliyon.2024.e38697

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.