MARATTO

article · Nuclear Engineering and Technology

Structural, physical, optical, and gamma ray shielding properties of SnO2-based boro-silicate glasses: The influence of substituting Na2O by SnO2

20248 citationsOpen accessMenoufia University

Abstract

The study focuses on creating new boro-silicate glasses doped with SnO2 for radiation shielding. It examines how substituting Na2O with SnO2 affects their structural, optical, and shielding properties. Density increases from 2.406 to 2.488 g/cm³ with rising SnO2, measured via the Archimedes Method. The examination for the glassy phase was performed using the XRD diffractometer. UV/Vis spectrophotometer analysis reveals reduced refractive index (2.412 to 1.976) and increased optical absorption-band gap (direct: 3.648 to 5.662 eV; indirect: 2.994 to 5.163 eV) with SnO2 concentrations of 0-9 mol.%). The effectiveness of the radiation shielding was assessed over the 0.059–1.408 MeV gamma-ray energy interval. The analysis demonstrates that when the concentration of SnO2 increases, the synthesized glasses' linear attenuation coefficient improves. As the SnO2 content was raised between 0 and 9 mol%, the linear attenuation coefficient rose between 0.489 and 2.892 cm−1 (at energy of 0.059 MeV) and between 0.126 and 0.128 cm−1 (at energy of 1.408 MeV), respectively. As the SnO2 content was raised between 0 and 9 mol%.

Research topics

  • Radiation Shielding Materials Analysis
  • Glass properties and applications
  • Nuclear materials and radiation effects

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.1016/j.net.2024.04.029

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.