MARATTO

article · IPTEK Journal of Engineering

Positioning Control of Satellite Antenna for High Speed Response Performance

20243 citationsOpen accessImo State University

Abstract

Dish antennas are essential elements in establishing communication between satellite and earth station. The response speed of the position control process of a dish antenna mounted on a moving vehicle that communicates via NigComSat-1R with a central control office is affected by round trip or time delay. Therefore, there is need to design a control system that will address this problem in order to achieve high speed positioning response. The mathematical models representing the dynamics of the antenna positioning system were obtained. A back propagation neural network (BPNN) based proportional integral and derivative (PID) controller was designed and added to the antenna position control loop. The resulting system was modelled in MATLAB. Simulation results indicated that it provided a rise time of 0.027 s, settling time of 1.06 s and overshoot of 0% at peak time of 0.06 s. This shows that the response speed of the control process using the designed BPNN-PID is 37 degree per second. Comparison with previous controllers applied to the same system indicated that BPNN-PID controller outperformed all of them. Generally, the BPNN-PID controller is suitable for high speed position control of the antenna and improves overall performance.

Research topics

  • Antenna Design and Optimization

Sustainable Development Goals

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.12962/j23378557.v10i2.a20670

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.