MODELING AND SIMULATION OF POST-COMBUSTION CO 2 CAPTURE PROCESS FOR 6.4 MWE BAGASSE FUELED POWER PLANT

Abstract

The emission of carbon dioxide, a greenhouse gas, contributes to the phenomenon of climate change; the largest source of carbon dioxide emissions are fossil fuel power plants. Post-combustion carbon capture (PCC) technology, which is based on solvents, is currently the most advanced technology for reducing carbon dioxide emissions from power plants. The Post-combustion Process, which uses conventional solvents, has a number of disadvantages, including high energy consumption for regeneration, solvent losses, corrosion of equipment, thermal instability, and environmental impact. Ionic liquids (ILs) and IL-based solvents have produced a novel method of CO 2 capture that is highly efficient, economical, and environmentally friendly. A rate-based steady-state model of the PCC process using the ionic liquid 1-hexyl-3-methylimidazolium glycine ([Hmim] [Gly]) was investigated using Aspen Plus ® . In Aspen Plus ® Electrolyte NRTL method and RK equation of state are used to compute liquid and vapor properties. From the process analysis carried out, it was found that the height and diameter of the absorber packing, the liquid-to-gas ratio and the solvent and flue gas temperatures have a positive effect on the CO 2 capture efficiency. The result showed a maximum CO 2 capture efficiency of 92% at a packed height of 12m and diameter of 0.9m. The best capture efficiency of 98.82% was achieved at an L/G ratio of 4.0.the process simulation study examined five key parameters for ([Hmim] [Gly]) solvent which may reduce the energy and cost required for CO 2 capture. The results show that aqueous ([Hmim] [Gly]) is a promising absorbent for CO 2 capture. Offering a pathway towards more sustainable and efficient carbon capture technologies. This study contributes to the advancement of carbon capture technologies and underscores their significance in mitigating climate change impacts.