article
This study presents a sensor design with a single notch resonating around 2 GHz, aimed at simulating the effect of phosphate temperature on the sensor's response. The sensor consists of a centrally positioned resonator coupled with two 50-ohm transmission lines, a configuration chosen to enhance sensitivity and selectivity to temperature changes. Simulated on a Rogers 5880 substrate with a thickness of 0.789 mm, the sensor resonates at a specific frequency, making it highly sensitive to phosphate temperature variations. Simulations were performed to assess the sensor's ability to determine phosphate temperatures ranging from 25°C to 60°C by measuring the frequency shift of unheated phosphate as a reference and comparing it to the shifts observed in heated samples. The results indicate a clear frequency shift corresponding to temperature changes, demonstrating the sensor's potential for accurate phosphate temperature measurement.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.1109/imas61316.2024.10818177
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.
