Maximizing the output power for electric vehicles charging station powered by a wind energy conversion system using tip speed ratio

Abstract

Abstract This study investigates the influence of tip speed ratio (TSR) as maximum power point tracking (MPPT) technique on energy conversion for wind-powered electric vehicles (EVs) charging stations. The data for 14 different models of (EVs) as well as the energy demand profile for El Sherouk city in new Cairo, Egypt, is used in the study. Those vehicles represent the models that are most likely to be used according to the nature of the Egyptian market from economic and technological concerns. This includes range, battery capacity, battery technology and charging methods. charging can be in the form of fast DC, three phases which are suitable for commercial charging stations or a single phase charging suitable for residential use. A simulation is done using MATLAB/Simulink for a wind turbine Permanent Magnet Synchronous Generator (PMSG) system including TSR MPPT algorithm. The energy output is compared with and without implementing the MPPT algorithms to measure the difference in energy. The system simulation optimized by the TSR MPPT algorithm shows an increase in the energy yield by 41.68%. The economic analysis showed a 30% reduction in the levelized cost of energy while utilizing the TSR concerning a bare system without an MPPT algorithm.