Effect of solvothermal-treated polyethylene on the mechanical properties of sandcrete blocks and concrete

Abstract

Abstract In building construction, seepage and dampness in walls present serious problems since they can cause structural failures and damage in both residential and commercial contexts. Finding more affordable options is necessary as mitigating these problems frequently requires expensive fixes. This study aims to evaluate the effects of solvothermal-treated polyethylene added at concentrations ranging from 0 to 1.0% on the mechanical properties of concrete and sandcrete blocks. In addition to assessing the workability, split tensile strength, and compressive strength of concrete samples at different levels of the polyethylene (PE) inclusion, the study looked into the water absorption capacity, density, and compressive strength of sandcrete blocks. The blocks’ compressive strength and water absorption capacity reduced as the amount of polyethylene additives rose, although there was a slight increase in the density. These changes remain well within the Nigerian Industrial Standards’ specified limits. Hardened concrete shows a drop in density, compressive strength, and split tensile strength with increasing polyethylene content, while fresh concrete's workability decreases as the percentage increases. 0.4% incorporation of the treated polyethylene achieved the target strength of 20 N/mm 2 while Sandcrete blocks with up to 1% of the solvothermal treated polyethylene had compressive strengths more than the 2.5 N/mm 2 minimum required for non-load-bearing walls. About 61% reduction in water absorption was achieved in 48 h by the blocks, presenting a promising and cost-effective solution for seepage-related issues in building construction.