Dual-functionalized lignin as a sustainable modifier for high-performance phenol-formaldehyde adhesives in plywood production

Abstract

H NMR, SEM-EDX, and contact angle measurements confirmed significant improvements in physicochemical properties. Notably, silylated lignins exhibited enhanced solubility in low-polarity solvents and a marked increase in hydrophobicity, with water contact angles reaching 127.7°. Phenol-formaldehyde (PF) adhesives incorporating raw and modified lignins (5-15 wt%) were formulated and applied in plywood production. Mechanical testing revealed that plywood bonded with 10 wt% Prop-lignin-DH achieved a bond strength of 5.44 MPa and 100% wood failure, outperforming conventional lignin-based adhesives. Furthermore, compared to the control PF resin, the modulus of rupture (MOR) and modulus of elasticity (MOE) increased by 38% and 27.3%, respectively. Shear strength also improved significantly, with gains of 56.1% under dry conditions, 17.6% in cold water, and 74.1% after boiling. In addition, formaldehyde emissions were reduced by 20% compared to standard PF resins, highlighting the potential of silylated lignin as a sustainable adhesive modifier for wood-based composites.