article · International Journal of Environmental Protection and Policy
The human body is composed of three-quarters of water, emphasizing the significant influence of water quality on our health. Consequently, it is essential to assess water quality in each lithologically distinct region. This research aimed to assess the Electrical Conductivity (σ) of water from Hand-dug Wells and Boreholes in Bida. A total of 40 samples, 20 from each source, were collected from key locations within Bida town. Analysis of the samples was performed using the Jenway DDS-307 conductivity meter, a versatile digital device adaptable to temperature changes through a probe. The mean σ values for Hand-dug Wells ranged from (260.00 ± 8.02) - (1335.67 ± 40.60) µS.cm<sup>−1</sup>. Borehole mean σ values varied from (33.53±0.67) - (1485.33±7.37) µS.cm<sup>−1</sup>. Among the 40 sampled Wells, nine (9) exceeded the benchmark, while six (6) approached the benchmark of 1000 µS.cm<sup>−1</sup> specified by the Standard Organization of Nigeria (SON) and the World Health Organization (WHO) for drinking water. Consequently, in terms of σ as a drinking water standard, this study recommends that 15 sources (both Hand-dug and Boreholes) are unsuitable for drinking but may be utilized for other purposes. The study also suggests further investigation of physico-chemical parameters and radionuclide concentration of groundwater in Bida town.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.11648/j.ijepp.20251302.11
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.