article · Chemosensors
Methanol (MeOH) is widely used in industry and is highly toxic when ingested. In this work, a new micro-conductometric transducer is functionalized with magnetic Fe3O4 nanoparticles capped with Artemisia Herba Alba (AHA) extract. The resulting AHA-Fe3O4 nanoparticles, crystallized in the cubic spinel phase, exhibit an average crystallite size of 6 nm. These nanoparticles were homogeneously dispersed within an electrodeposited chitosan film on interdigitated electrodes for conductometric measurements. The gas-sensing behavior of the films was evaluated at room temperature toward methanol, ethanol, and acetone vapors. For methanol, the sensor shows response times (tRes) ranging from 9 to 12 s depending on the analyte concentration, with a detection limit of 600 ppm in the gas phase. The methanol sensor presents a sensitivity 30 times lower for acetone and 3.7 times lower for ethanol. The sensor exhibited stable detection sensitivity over two months, under intermittent storage at 4 °C. Methanol was detected in the headspace of commercial product samples, in good agreement with the producer’s value.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.3390/chemosensors14040090
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.
